Page 1 of 2
#1 Saturday 8th by charles44 05.02.2014 10:06

avatar

Don't forget we will have the AGM on Saturday morning - hopefully will all fit in the hut, if not will use Bench rest area.

Following that given that the wind is due to be gusting into mid 40mph I am planning to set a few targets in the top field for a bit of practice if anyone else is interested........

#2 RE: Saturday 8th by Bob P 05.02.2014 12:55

avatar

Yep. interested in the windy targets. I want to see which of my guns takes less wind. anyone with an airstripper going?
Bob

#3 RE: Saturday 8th by Lighty 05.02.2014 13:29

avatar

I have a uk Neil one I don't use Bob.. It will need stripping as it is currently blue & purple anodised assuming this is for the MPR. Was going to stick it on ebay, but you are more than welcome to try it if you like..

#4 RE: Saturday 8th by PJ 05.02.2014 15:44

avatar

Hi Bob, I have a Rowan one which was fitted on (what is now) your MPR. Polished silver with black cone. Pretty much 'as new' condition. Interested? If so, I could bring it along for you to try.
Best wishes,
PJ

#5 RE: Saturday 8th by Topher 05.02.2014 16:12

avatar

Any idea of time ??
I will try to make it....

As for the wind ? had enough of that last sunday !!

#6 RE: Saturday 8th by Si7777777 05.02.2014 16:26

avatar

Early start would be appreciated, maybe 9 or 9:30?

#7 RE: Saturday 8th by Bob P 05.02.2014 17:28

avatar

Thanks for the offers Steve and Phil but im not actually looking for a stripper for my gun, not yet anyway, I just wanted to see if there was a big difference in wind drift from a bare barrel and a stripped one. Been reading the airstripper thread on the BBS and trying hard not to get too involved, but still curious. Just want to compare to a gun with a set up stripper.
Bob

#8 RE: Saturday 8th by Blackscale 05.02.2014 17:50

avatar

I have a couple of Strippers / Muzzle toys..? if you are actually after one, let me know i will pop them up the Club...

Spongey X

#9 RE: Saturday 8th by Blackscale 05.02.2014 17:52

avatar

Yeah!, what time was it...?

#10 RE: Saturday 8th by Lighty 05.02.2014 18:00

avatar

The offer was for testing Bob :) pick it up Sunday at Horsham & return it once you've finished tinkering.

#11 RE: Saturday 8th by Bob P 05.02.2014 19:38

avatar

Cheers Steve, I will give it some thought, my MPR has a threaded barrel though.
Thanks for the offer.
Bob

#12 RE: Saturday 8th by charles44 05.02.2014 20:47

avatar

I will bring two EV2 along one with a Rowan and one without?

#13 RE: Saturday 8th by Bob P 05.02.2014 20:48

avatar

Sounds ideal Charles

#14 RE: Saturday 8th by Lighty 05.02.2014 21:53

avatar

Ah, yes, I remember Phil having it screw cut now. Won't fit then. Have you tried it with & without a silencer ?

#15 RE: Saturday 8th by Bob P 05.02.2014 21:55

avatar

Nope, good idea Steve, will try it Saturday,
Bob

Xobor Create your own Forum with Xobor